Extender

You are interested in extenders and accessories?

Please select!

CAN FD Satellite Interface

Satellite with 4 ISO CAN FD inputs

  • Extension unit for ARCOS 1.5, IPElog2, M-LOG V3
  • Feature connector with GbE, supply and wake function
  • Dasychaning of several satellites for ARCOS 1.5
  • WoC and NML support for ARCOS 1.5
  • Supported logger software: dataLog and TESTdrive
  • Configuration with Phoenix and IPEmotion Software
  • 9 status LEDs
Extender: CAN FD Satellite Interface

Learn more

Device
Voltage supply
6 … 36 VDC
Supply voltage thresholds
Switch-on 6 ±0.3 VDC / Switch-off 6 ±0.3 VDC
Power consumption, typical
2.0 W
Power consumption, standby
0.003 W
Working temperature range
-40 … 85 °C (-40 … 185 °F)
Storage temperature range
-45 … 90 °C (-49 … 194 °F)
IP-Code
IP 40 (ISO 20653 - 2013)
Relative humidity
5 ... 95 %
Dimensions
W109 mm x H35mm x D130 mm (4.29 in x 1.38 in x 5.12 in)
Weight
365 g (0.80 lb)
Configuration interface
Ethernet
Data transfer rate
1 GbE Ethernet (IEEE 802.3)
Configuration software
IPEmotion / Phoenix
CAN interface
CAN FD (ISO 11898-1)
4
CAN FD Baud rate
4 Mbaud
Input sockets
1 Plug 18-pin (1379101-1)
Galvanic isolated
No
Wake on CAN (WoC)
Yes (boot time 60 ms)
No Message Lost (NML)
Yes
Status-LED
4 Rx/Tx for CAN inputs and WoC
Status-LED
5 ETH link
Power consumption, WoC+NML
2.0 W
Power consumption, WoC
0.06 W
Accessories
System cable
System cable
System cable
System cable
111010
System cable
113347
Input cable
Order code
Code
113776

COMgate V3

M-LOG-V3-/M-LOG gateway for wireless data transfer

  • Modem und WiFi interface module
  • Inbuild modularly equipped 4G / LTE modem
  • WiFi interface 802.11 b/g/n
  • VPN tunnel and SFTP data transfer
  • Gigabit Ethernet interface to logger and PC
  • 9 LEDs for status and signal strength indication
Extender: COMgate V3

Learn more

Device
Voltage supply
9 … 36 VDC
Power consumption, typical
6.0 W
Working temperature range
-40 ... 70 °C (-40 … 158 °F)
Storage temperature range
-45 ... 95 °C (-49 … 203 °F)
IP-Code
IP 54 (ISO 20653 - 2013)
Relative humidity
5 ... 95 %
Dimensions
W158 mm x H26 mm x D102 mm (6.22 in x 1.02 in x 4.02 in)
Weight
600 g (1.32 lb)
Configuration interface
Ethernet
Data transfer rate
1 GbE
SIM card size
Mini SIM (2FF)
Interfaces
Modem socket
FME for external antenna
Networks
GSM/ GPRS/ EDGE/ UMTS/ LTE
Regional modem coverage
EMEA/ASIA/PAC
Regional modem coverage
ASIA/PAC/SOUTH AMERICA
Regional modem coverage
NORTH AMERICA
External modem socket
Lemo EGG 0B (9-pin)
WiFi socket
SMA connector for external antenna
WiFi standard
802.11 b/g/n (2.4 GHz)
LAN
2 x 1 GbE
Status LED
Multi color device LED
Status (operation, error, power)
PC link LED
PC communication
Logger link LED
Logger communication
WiFi/Modem LED
Operation status
Multi color WiFi/Modem LED
Radio signal strength
Red
< 50%
Yellow
50 … 75 %
Green
> 75 %
Accessories
System cable
System cable

CLFD Box

CAN, LIN, FlexRay, DIO interface module for ARCOS 1.5 logger

  • Quickstart, No Message Lost (NML), Wake on CAN/LIN/FlexRay
  • CLFD box can be cascaded (on ARCOS 1.5 data logger)
  • 16 CAN high speed inputs
  • 8 LIN inputs
  • 2 FlexRay inputs
  • 2/2 digital inputs / digital outputs
Extender: CLFD Box

Learn more

Device
Voltage supply
6 … 50 VDC
Voltage supply
8 … 27 VDC (for LIN measurement)
Supply voltage thresholds
Switch-on 6 ±0.3 VDC / Switch-off 6 ±0.3 VDC
Power consumption, typical
9.0 W
Power consumption, standby
0.1 W
Working temperature range
-40 … 85 °C (-40 … 185 °F)
Storage temperature range
-45 … 90 °C (-49 … 194 °F)
IP-Code
IP 40 (ISO 20653 - 2013)
Relative humidity
5 ... 95 %
Dimensions
W184 mm x H53 mm x D140 mm (7.24 in x 2.09 in x 5.51 in)
Weight
1450 g (3.86 lb)
Configuration interface
Ethernet
Data transfer rate
100 Mbit Ethernet (IEEE 802.3)
Test standards
AK-LV 01
CAN interface
CAN HS (ISO 11898-2)
16
Input sockets
15 x CAN on SUB-D (44-pol)
Input sockets
1 x CAN on SUB-D (9-pol)
Galvanic isolated
No
Wake on CAN (WoC)
Yes (boot time 320 ms)
No Message Lost (NML)
Yes
Status LED
16 Rx/Tx for CAN interfaces / 1 x ETH link
Power consumption, WoC+NML
1.5 W (8 CAN inputs)
Power consumption, WoC
0.1 W
LIN interface
LIN (1.3 & 2.0)
8
Input sockets
8 x LIN on SUB-D (15-pol)
Galvanic isolated
No
Wake on LIN (WoL)
Yes
Quickstart
Yes
Status LED
8 Rx/Tx for LIN interfaces / 1 x ETH link
Power consumption, WoL
0.1 W
FlexRay interface
FlexRay
2
Input sockets
2 x FlexRay on 2 x SUB-D (9-pole)
Galvanic isolated
Yes
Wake on FlexRay (WoFR)
Yes
Quickstart
Yes
Status LED
4 Rx/Tx for FlexRay interfaces / 1 x ETH link
Power consumption, WoFR
0.6 W
DIO interface
Digital I/O
2 / 2
Input sockets
2 x in / 2 x out SUB-D (9-pole)
Galvanic isolated
Output: yes / Input: no
Quickstart
Yes
Status LED
4 In/Out
Switching capacity digital-output
600 mA
Accessories
System cable
Input cable
Order code
Code
110444 (Model CLFD V1.1)
Code
111118 (Model CLFD V1.2)

ETH-Gateway CLFD

ETH-Gateway with CAN, LIN, FlexRay interfaces for IPEmotion

  • Protocol and signal based measuremend with IPEmotion Protocols PlugIn
  • Hardware detection of M-Modules on all CAN Interfaces
  • 16 CAN high speed inputs
  • 8 LIN inputs
  • 2 FlexRay inputs