Iso Clamp Connector 200 kHz

DC high-voltage current clamp front-end device

Iso Clamp Connector 200 kHz

DC high-voltage current clamp front-end device
  • Bandwidth up to 200 kHz
  • Current measurement in high-voltage networks up to 1 kV
  • Reliable current measurement with battery powered current clamp adapters
  • For hybrid vehicle, electric verhicle and aircraft applications
  • Direct connection to all IPETRONIK SENS modules
  • Approved applications according to CAT I and CAT II

Inquire now Datasheet Add to notelist

Technical Data

Genauigkeit bei Umgebungstemperatur 25 °C (77 °F) ±0.20 %
Inputs 1
Voltage supply 15 VDC
Working temperature range -20 … 70 °C (-4 … 158 °F)
IP-Code IP 67 (ISO 20653 - 2013)

Iso Clamp Connector 200 kHz – Technical data

Download as PDF

Input HV
Input sockets 4 mm saftey banana plugs
Measurement range ±1 V (other ranges on request)
Permanent voltage Max. 50 V
Pulse voltage 500 V (pulse width 500 ms, period 60 s)
Genauigkeit bei Umgebungstemperatur 25 °C (77 °F) ±0.20 %
Accuracy at ambient temperature -20 … 70 °C (-4 … 158 °F) ±0.50 %
Channel impedance 10 MΩ || 10 pF
Cut-off frequency 200 kHz (max. input cable lenght of 1 m)
Hardware filter Bessel (6-pole)
* Safety instructions Do not use Iso Clamp Connector for applic. on AC voltages of 3-phase current drives in e & hybrid vehicles! Current clamp has to meet at least the same category (CAT) as Iso Clamp Connector! Users working on HV applic. must be trained & approved.
Channel CNT
Number of inputs
Excitation
Sensorspeisung
Galvanic isolation
Test voltage 3536 VAC @ 50 Hz (sinusoidal)
Application according to CAT I ±1000 VDC
Application according to CAT II ±600 VDC, 600 VAC @ 50 ... 60 Hz (sinusoidal)
Device
Inputs 1
Genauigkeiten
Voltage supply 15 VDC
Power consumption, typical 0.6 W
Working temperature range -20 … 70 °C (-4 … 158 °F)
Storage temperature range -30 … 70 °C (-22 … 158 °F)
IP-Code IP 67 (ISO 20653 - 2013)
Relative humidity 5 ... 95 %
Dimensions W126 mm x H50 mm x D25 mm (4.96 in x 1.97 in x 0.98 in)
Weight Approx. 120 g (0.26 lb)
Output sockets ODU Series F, Size 1 (6-Pin)
Output signal ±2 V
Schutz gegen aggressive Flüssigkeiten
Degree of pollution 2
Max. Altitude 2000 m
Electrical data
Status LED
Accessories
System cable 620-640, 620-629
Current clamp I-CONVERT-PAC26, I-CONVERT-PAC16

Personal Consultation

Do you have questions about this product or a special application? Get in touch with our experts!


+49 7221 9922 0