M-FLOW

Highly Precise Flow Measurement. Compact, Rugged, and Seamlessly Integrated into the Measurement Chain

The flow meter M-FLOW provides - together with the flow meter turbine - valid data for the optimization and quality control of circuits within the whole vehicle. For cooling circuits with water, glycol & refrigerants, for circuits with oils, injector systems, fuels, for the cooling of fuel cells. On the test bench, in the laboratory, during road tests and production.

Your advantages with M-FLOW:

  • Highly compact and rugged solution with free rotatable 360° pickoff
  • Broad range of applications: water, oils, fuels, AdBlue and many other liquid media
  • Precise results at every temperature thanks to linearization
  • "Plug & Play" with simple configuration in IPEmotion
  • Process reliability thanks to the direct digitalization of the values and a decrease in components
  • Direct integration into the CAN bus without additional cabling or power supply
  • Flow measurement in the desired unit, e.g. m3/hour, liters/minute, ml/minute, gallons/lb per hr/min/sec
  • Maximum linearity and 15 % less pressure loss with the new turbine design

M-FLOW and DAQ Software IPEmotion

Plug & Play thanks to Seamless Integration

Your advantages at a glance:

In combination with the DAQ software IPEmotion, you benefit from an integral solution for your flow measurement. The configuration is simple, secure, and done in a few clicks. Comprehensive data acquisition and visualization functions offer the evaluations you need for your development project. Naturally, IPEmotion provides the data in your desired unit.

  • System simplicity thanks to a full process integration between M-Flow and IPEmotion
  • Easy, intuitive configuration in one software as “Plug & Play“
  • Process reliability thanks to the direct digitalization of the values and a decrease in components
  • Higher accuracy due to lower conversion losses
  • Direct integration into the CAN bus without additional cabling or power supply
  • No converter box necessary

M-FLOW: Your Efficiency and Quality Booster – Valid Results in Your Desired Unit

Which unit do you need? m3/hour, liters/minute, ml/minute, gallons/hour, lb/minute? M-FLOW calculates the flow in your desired unit. Valid and highly precise results at every temperature thanks to linearization.

  • Close-to-production measurement with almost no pressure loss
  • Various mechanical connections, e.g. hose, clamp, thread
  • Flow measurement in the desired unit, e.g. m3/hour, liters/minute, ml/minute, gallons/lb per hr/min/sec
  • Automatic temperature/viscosity correction in real time
  • Integrated liquid temperature measurement via pickoff
  • Individual external temperature measurement acc. to customer demands
  • Up to 20 calibration points per viscosity

The Turbine: Maximum Linearity with the Latest Rotor Blade Design Generation

The turbine is the centerpiece of the M-FLOW. With their new helical rotor blade design, the turbines developed by our partner Trigas offer a highly improved linearity and 15 % less pressure loss compared to conventional rotor blades. With regard to your individual requirements, such as the flow rate, we provide you with the perfect turbine – as for your forward and reverse flow measurement.

Suitable for corrosive liquids

For the measurement of corrosive liquids, we provide highly corrosion resistant housings, e.g. high-strength stainless steel 1.4460 / SS329. Please do not hesitate to contact us!

Areas of application

Cooling circuit at all circuit components
(water, glycol) – engine cooling, HV memory cooling,
HV power electronics, HV three-phase drive,
HV OnBoardCharger, HV ECU,
HV PTC/heat exchanger, heat pump
Hydraulic circuit steering
Engine oil circuit suction pump, pressure line
Cooling circuit Computer systems for HMI interface (ECU with HeatPipe)
Fuel system e.g. Diesel, gasoline, LPG
Injector systems e.g. H2O

Are you interested in the M-FLOW?

Please fill in the contact form - we will get in touch with you as soon as possible.

Please add 1 and 6.