Release Notes ____________________________________________________________________________________________________________ Bitte beachten Sie, dass die Release Notes nur in englischer Sprache verfuegbar sind. Veuillez faire attention à ce que les Release Notes sont seulement disponible en anglais. Please note that the release notes are only available in english language. Application: IPEmotion PlugIn Protocols Last entry: 16.12.2020 Current version: 02.08.00 ____________________________________________________________________________________________________________ The distribution of beta versions or release candidates to customers is not enabled without authorization of the management. System requirements: * Screen resolution: min. 1080 x 800 pixel * Processor: min. 2 GHz * RAM: min. 2048 MB * IPEmotion 2020 R2 Recommended system requirements: * Screen resolution: min. 1920 x 1200 pixel * Processor: min. 3 GHz Multi-Core * RAM: min. 6144 MB * Storage medium type: SSD Supported platforms: * Microsoft Windows 10 (32 Bit and 64 Bit operating systems) * Microsoft Windows 8.1 (32 Bit and 64 Bit operating systems) * Microsoft Windows 7 (32 Bit and 64 Bit operating systems) The following software will be installed: * Microsoft Visual C++ 2015 Redistributable * IPETRONIK CAN-Server V01.22.06 ____________________________________________________________________________________________________________ Rights IPEmotion PlugIn Protocols needs administrator rights during installation. Standard user rights are needed for working with IPEmotion PlugIn Protocols. ____________________________________________________________________________________________________________ Content The following points describe the extensions, changes and exception handlings in the corresponding versions: 02.08.00 Re-init tries can be configured for XCP/CCP/OBD-II OBD-II mode 4 (clear fault codes) ODT optimization for XCP Only update stallites and ETH gateways when firmware differs 02.07.03 FixedBug: Tester present correction (case 57538) 02.07.02 FixedBug: UDS read memory by address correction (case 57358) FixedBug: OBD signal 'Evap System Vapor Pressure' corrected 02.07.01 FixedBug: Only one J1939 instance can actually be used (case 56420) 02.07.00 J1939 on request signals including bus scan J1939 diagnostics messages Extended XCP process status ECU firmware sync: Store last used iev permanently Byte and text signals for positive responses of UDS from idf Support for mutiplexed signals with more than one multiplexer value Kvaser Hybrid Known restrictions: Only one J1939 instance can actually be used 02.06.01 VN7640 FixedBug: UDS follow up frames might be missing 02.06.00 J1939: new stack, event controlled, bus scan, DTC channel UDS diagnostics via pdx Use serial number flag Slot id range filter for FlexRay traffic Output functionality for ETH traffic to send ETH frames FixedBug: Sample point confguration (case 53554) FixedBug: LIN control with Vector hardware (case 53825) FixedBug: UDS acquisition with ECU address 0x00 (case 48941) 02.05.01 Firmware update for satellites and ETH gateways FixedBug: EPK check for XCPonCAN FD corrected (case 51743) FixedBug: Update position handling of FlexRay signals corrected 02.05.00 FlexRay PDU measurement Trigger for XCP polling daq lists ECU firmware sync with zipped format Status module for OBD-II Support of FlexRay signals with multiple cycle definitions Default names of bus status signals begin with connector name Option to disable a medium type at detection Vector VN1530/VN1531 Vector VX1135 PEAK PCAN-USB X6 02.04.01 Italian, chinese, japanese and korean language 02.04.00 CAN FD PDUs Traffic with index XCP: Slow polling lists (< 1 Hz) LIN interfaces of IPEcan PRO / IPEcan PRO FD ValueCAN4-4 02.03.00 XCPonFlexRay UDSonCAN signal measuring WWH-OBD ECU firmware synchronisation PDU signal measurement Self receive for CAN, LIN and FlexRay signal measurement 02.02.00 XCPonCAN FD CAN FD and FlexRay satellite Start-/Stopptrigger for CCP/XCP protocol XCPonETHERNET packed mode (XCP 1.4) CCP/XCPonCAN: Second Tester Detection Event controlled signals for CCP/XCP PCAN-PCI Express FD SOME/IP CAN status module 02.00.00 ETH gateway XCPonTCP Manual CANdb signal creation Event controlled CANdb signals CANdb export with VTABs LIN traffic FlexRay traffic FixedBug: OBD signal name corrected (case 35989) 01.08.00 Send functionality for CANdb signals LIN support OBD-II: new PIDS, baudrate check Text channels for OBD-II vehicle and calibration information Start / stop storage for IPEhub2 FixedBug: Active flag for CCP/XCP signals setable (case 31466) 01.07.01 Characteristics für XCPonETHERNET 01.07.00 XCP characteristics from A2L Vector VX devices 01.06.00 XCPonUDP OBD mode 21 New KVASER devices (USBcan Pro 5xHS, PCIEcan, Memorator Professional II, Leaf II, Memorator Light) FixedBug: J1939 signals with motorola forward were not always interpreted correctly FixedBug: GM-LAN continues after a ERR_SUB_FUNCTION_NOT_SUPPORTED_INVALID_FORMAT reponse at CLEAR_DIAGNOSTIC_INFORMATION FixedBug: Correction for ODB PID´s with size larger than 4 byte (case 28476) V01.05.00 CAN FD support for IPEcan FD, IPEcan FD PRO and Vector VN16xx IPEhub features of firmware V01.02.00 FixedBug: Protocol communication with IPEhub2 Fw V01.00.00 might cause problems 01.04.03 FixedBug: GM LAN PID check 01.04.02 FixedBug: Correction for GM LAN signals with 32 bit (case 24537) 01.04.01 FixedBug: Correction for GM LAN signals with same PID (case 23955) 01.04.00 CANdb export GM-LAN-ODX Option for ECU connection mode Additional CAN hardware (IPEhub2, Kvaser Blackbird 2, USBcan light) Known restrictions: Protocol communication with IPEhub2 Fw V01.00.00 might cause problems V01.03.00 Traffic and CANdb acquisition Polling with multiple polling lists Support of J1939 protocol CCP characteristics from A2L CCP counter Automatic adaption of dependend parameters V01.02.00 GM-LAN job-based Vector VNxxxx PEAK-CAN-PCI-4 CAN ValueCAN3 V01.01.03 EPK check does not abort the ECU init OBD single PID requests OBD bugfixes V01.01.02 correction for GM-LAN V01.01.01 Correction for seed and key of XCP Support for french, italian, chinese, japanese and korean language V01.01.00 Support for CCP characteristics Support for XCP Support for GM-LAN Support for OBD-II V01.00.01 Support for french, italian, chinese, japanese and korean language V01.00.00: First version