Release Notes __________________________________________________________________________________________________________ Bitte beachten Sie, dass die Release Notes nur in englischer Sprache verfügbar sind. Veuillez faire attention à ce que les Release Notes sont seulement disponible en anglais. Please note that the release notes are only available in english language. __________________________________________________________________________________________________________ Application: IPEmotion PlugIn CAETEC dataLog Last entry: 20.12.2020 Current version: 20.10.00 The distribution of beta versions or release candidates to customers is not enabled without authorization of the management. System requirements: * Screen resolution: min. 1280 x 800 pixel * Processor: min. 2 GHz * RAM: min. 2048 MB * min. IPEmotion 2020 R3 Recommended system requirements: * Screen resolution: min. 1920 x 1200 pixel * Processor: min. 3 GHz Multi-Core * RAM: min. 6144 MB * Storage medium type: SSD Supported platforms: * Microsoft Windows 10 (32 Bit and 64 Bit operating systems) * Microsoft Windows 8.1 (32 Bit and 64 Bit operating systems) * Microsoft Windows 8 (32 Bit and 64 Bit operating systems) * Microsoft Windows 7 (32 Bit and 64 Bit operating systems) The following software will be installed: * Microsoft Visual C++ 2013 Redistributable The following software is required: * Microsoft .NET 4.6.1 Framework The IPEmotion PlugIn CAETEC dataLog program folder must be installed locally. __________________________________________________________________________________________________________ Rights IPEmotion PlugIn CAETEC dataLog needs administrator rights during installation. Standard user rights are needed for working with IPEmotion PlugIn CAETEC dataLog. __________________________________________________________________________________________________________ Content The following points describe changes, restrictions and bugs in the corresponding versions: Known restrictions: - The export of incompletely loaded configurations might be faulty if signal references cannot be resolved - Detect and Init might not work if user management is activated on logger V20.10.00: Feature: Supports the configuration of VLANs on ETH interfaces Feature: IP address of PLP communication can be selected in properties of ETH interfaces Feature: A span trigger can be configured to trigger the creation of new files in the same dataset Feature: Possibility to write alias of bus channels, A2L files and EPK versions of XCP stations and to dataset files. Feature: Supports the activation of a coredump in addition to the stacktrace by datalog Feature: Creation of EMBU-Sys Firmware DLUA for the openABK display is supported Feature: Hidden option to create the names of automatically generated storage groups with underscore instead of space character FixedBug: Parameters 'allow_halt_due_to_clock' and 'single_slot_enabled' of flexray channel are now exported correctly to CFG FixedBug: Monitoring channels can now be renamed in the grid FixedBug: Script trigger groups are now exported correctly for monitoring channels FixedBug: Parameters of network destinations are now written correctly without quotation marks V20.06.00 BehaviourChange: Parameter ap_scan is not supported any more and will be auto-set by logger BehaviourChange: Access point scan is now activated by default Feature: The corresponding start/stop trigger event can now be captured within the datafile Feature: New method "event writer" is now available for MDF measurements Feature: Multiple IP addresses for ETH's Feature: File server can now be explicit selected for every single transfer-event Feature: Discard datafiles if they don't contain any data Feature: Ability to include SecOC certificates to the configuration Feature: New internal runstate signal "measinputdelaysource" Feature: URL of AXIS F44 camera is now fully editable by parameter options Feature: Re-Import/Sync now also updates external files Feature: External files from a ccmc are now extracted on import/open to the IPEmotion import directory Feature: CANdb export now also available for complete CAN/CAN-FD/CAN-Virtual channel FixedBug: UDS start bit calculation is correct again FixedBug: Syntax highlighting of AND and comments longer 50 lines is fixed FixedBug: Syntax highlighting for USBPLUGGED/UNPLUGGED event now available FixedBug: Storage rate of a signal group is not changed anymore when cut/copy a new signal to it FixedBug: Renaming of signal reference on signal name change for monitoring events is fixed FixedBug: Performance optimization for large signal imports FixedBug: No duplication on J1939/DLT stations after import of old configuration FixedBug: External files in ccmc will not get lost on save even if the loaded ccmc is not available any more FixedBug: DAQ lists are now recognized by the script syntax check FixedBug: Datafiles do now get recognized in script FixedBug: Correct motorola format exported for multiplex identifier FixedBug: Analog-IN sensor excitation removed, as not supported by dataLog FixedBug: Active state of PLP interface does now get synchronized with corresponding bus trace channel V20.02.01 FixedBug: Fixed script check if more than one log file is used FixedBug: With a previously loaded CCMC file, EMBU-Chart layout files are now correctly used by this CCMC when saving the CCMC file again, if the plugin option display configuration "from ccmc/ccmi" is selected FixedBug: Bus test parameters can now be added for CAN, CAN-FD, LIN and FlexRay interfaces in the column overview FixedBug: Missing "#generated... " "cfg_generat.." entries are also written in A2L cfgincludes FixedBug: Formulas are now also exported correctly if a used signal is located in an unloaded sub-configuration FixedBug: Decompression of uncompressed cfginclude/ccmi does not produce anymore empty result file just the error message FixedBug: The previously incompletely removed plugin option "Include reference via alias" is now completely removed FixedBug: Disabled PLP interfaces and devices are no longer exported to the dataLog configuration V20.02.00 Feature: Drivebay enabled for ETHOS logger and unmount trigger added to Drivebay configuration. Feature/BehaviourChange: Restructuring dataset transfer regulatories Feature: Support for PLP protocol and PLP-ETH, PLP-CANFD and PLP-FR Interfaces Feature: µCROS SL now supports Script Feature: Triggerassignment is now supporting assignment of triggers to triggergroups defined in scripts Feature: Now supporting LIN-satellite interfaces Feature: new LIN(;) functions with interpolate and extrapolate Feature: E-Mails, Logfilemessages and Displaymessages can now be exported to partial configurations Feature: Signals are now containing their storage reference Feature: Re-Import/Sync now respects prefered database source FixedBug: Plugin-defined operators must be written in lower case letters FixedBug: Fixed export of parameter fdf and brs. The export depends now on CAN-ID Bit 30 Known restrictions: The "Include reference via alias" plug-in option has been moved to the SubConfig options, but is still visible in the plug-in option and the documentation. The export of incompletely loaded configurations is faulty if signal references cannot be resolved V19.10.00 BehaviourChange: Adopted default channel numbers for analog, digital-in and digital-out on µCROS SL to fit physical delivery-default BehaviourChange: Comments are now tree elements BehaviourChange: Ethernet ECUs are now checked against their ETH connectors network settings as well as other network members. BehaviourChange: Alternate channel number is now storage channel number, phys. channel number is shown as well in trace grid BehaviourChange: Config-comments are now a tree node and not longer part of the Logger-"Tab" BehaviourChange: Tracechannels can now be linked via numeric reference in partial configuration Feature/BehaviourChange: Wifi scanning and country can now be configured due to legal requirements. ATTENTION: Wifi setting "active scan" is by default set to passive and default country is 00 (world-regulatory domain) Feature: New internal signals "measinputdelay" and "measprocessingdelay" Feature: Support for new parameter "UseSettingsFromStation" Feature: Support for new parameter "compressionlevel" for MDF4.1 files Feature: Partial configurations can now also be initialized via "Initialize" Feature: Support for new XCP parameter "max_dlc" Feature: Timeout default can now be set via expert settings Feature: DBC exporter for manual-defined messages Feature: Trigger group assignment is now also available within a triggers configuration tab. Feature: µCros with FlexRay or CAN extension can now be configured Feature: Project parameter variables can now be used in user login name for SFTP servers Feature: Dataset and Ringbuffer nodes can now be exported to partial configuration Feature: "cfg_generator" parameter now additionally contains the IPEmotion version Feature: DBC, Fibex, ARXML and manual-defined messages can now also be added to VCAN's Feature: VTAB's now get compumethod name as defined in ARXML Feature: Busstatistic signal renaming magic now also works for their display names Feature: Option to prefer files from ccmc or filesystem-reference Feature: Firmware, WebIf and Licence Upload can now be done via "Functions" Feature: CCMC's can now be saved via "save" and "save as..." buttons Feature: Performance optimizations Feature: "Save" now allows also to save configurations with warnings and errors Feature: Multi-ETH camera support Feature: Formulas supporting linear calctables Feature: Alias-Channels can now also be added to VCAN, LIN, Flexray and ETH nodes FixedBug: Fixed export of XCP station "transportlayer" parameter fdf and brs. The export depends now on CAN-ID Bit 30 FixedBug: Several smaller bugfixes and performance optimizations V19.06.00 BehaviourChange: New sub-configuration file format .ccmi Feature: New internal signals for CPU and process surveillance Feature: Datafiles can now be attached to mails V19.02.00 BehaviourChange: BARROS is now called ETHOS BehaviourChange: Trace-Channels can only be used with alias-referencing Feature: Support for user-defined special tags Feature: Audio recording available for openABK-Displays Feature: Support for DLT measurement Feature: SFP+ now available for ETHOS Logger Feature: PDU support for FlexRay-signals Feature: Support for signals with multiple multiplexor values Feature: Combined trigger for audio device Feature: Additional tree nodes can now be exported to sub-configurations including grid elements Feature: Optimized hardware detection Feature: Support for reimport sub-configurations to main-configuration Feature: Support for accesspoint priorisation Feature: Signalalias node for CAN signals Feature: Protocol signals namespace can now be extended with parent channel name Feature: Tree view now sortable by channel number Feature: System time and date can now be used as special variables for export Feature: Integration of A2l to cfginclude converter Feature: Free naming of file server activated FixedBug: Several formular parser optimizations FixedBug: Global bus check options will now be exported correct FixedBug: ETH Signal-PDU Updaterate is now managed on message level ATTENTION: Needs reimport of database/signals to take affect for existing configurations! FixedBug: Attachment of external files to .ccmc-container now works again for FlexRay and ETH FixedBug: Script triggers will now be added to Trigger Groups outside the script FixedBug: "Use as default" for ring buffer now works individually from normal datasets FixedBug: FlexRay Parameter for active communications will now be exported FixedBug: Added missing LIN status signal FixedBug: Several performance optimizations V18.10.00 KnownRestriction: Currently no support for DLT measurement BehaviourChange: E-Mail and Logfile-Messages moved to another position within the configuration tree. Feature: New logger system Barros Feature: Autosar PDU for CAN-FD and ETH measurements Feature: Support for Packed DAQ Mode Feature: Support for UDS/KWPonCAN-FD Feature: Support for XCPonCAN-FD Feature: Support for J1939 including DM1 Logfile Feature: UDP signal measurement on ETH interfaces Feature: Support for PTP on ETH-Interfaces Feature: DHCP server for ETH interfaces Feature: Storing of triggerstates in timelog measurements Feature: Support for method alias Feature: Bus check for businterfaces Feature: New datatransferevent 'USB plugged' Feature: Support for sub-configurations Feature: Support for Arcos/Barros Feature Interfaces Feature: Support for manual busmessages Feature: Support for Loggers with deprecated IP-range Feature: Native .ccmc integration in IPEmotion where .isf files are allowed Feature: Namespace deactivatable Feature: EPK string will be also used as GET_ID default V18.02.00 Feature: New logger type µCROS SL. Feature: Support for ARCOS DriveBay. Feature: Support for predefined DAQ-lists. Feature: Support for XCP resume mode V17.10.00 Feature: Support for VTAB's. Feature: Tracing in MDF 4.x file format. Feature: Storage target selection for datasets. Feature: Reference to local include files. Feature: PIN Entry for PPP SIM unlock. Feature: Multi USB-camera support. Feature: New formula type "Script expression". Feature: Global priority for data transfer events. Feature: Commentblocks for MDF 4.1 files. BehaviourChange, Feature: Added WPA/WPA 2 option to wifi accesspoint keymanagement and used as new default. Removed: Script files can no longer be attached to e-mails. FixedBug: BehaviourChange: Methods for mdf files now have to be unique V16.10.01 BehaviourChange, Feature: Change in dynamic e-mail syntax and more operands. Feature: Support of UPS interface. Feature: Support for CCP/XCP station triggers. Feature: Support for legacy datafile names. Feature: Event-controlled signal aquisition (on receive and on update). Feature: Support of SOME/IP including FIBEX import. Feature: Timeout check (signal check) for signals. Feature: Valid range and invalid values for signals. Feature: Project parameters can now also be used as variables in measurement tasks. Feature: New script editor for dataLog scripting. Feature: To support include configurations, a reference can now also be set manually. Feature: To support include configurations, a configuration with errors or warnings can now also be exported. FixedBug: By Undo/Redo deleted or undeleted signals does not work with formulas correctly. FixedBug: Removed: Predefined DAQ lists now only available for versions >= V18.02.00 V16.10.00 Feature: Support of parallel datasets. Feature: Keep and discard triggers for datasets. Feature: Ring-buffer datasets. Feature: E-mails now support attachments and signal values. Feature: Dynamic values in e-mail texts. Feature: Headerprofiles for MDF41 files. Feature: Channelnumber mapping in BLF/ASCII files. Feature: Script log files can be set up. Feature: Bus statistic signals for Ethernet and FlexRay interfaces. Feature: Configuration of audio device LEDs and buttons. Feature: Support of WakeOnCall and WakeOnText. Feature: Support of CAN-FD interfaces. V15.10.01 Feature: detect, initialize or reset a connected logger and perform a licence check Feature: add an IPEmotion App configuration to ccmc-file Feature: Extended Monitoring functionality New PlugIn-Option: "Create and synchronize external files" New PlugIn-Option: "Extended FlexRay namespace" Feature: configuration of CAN runstate parameters Feature: configuration of wake-on-time functionality for ARCOS 1.5 Feature: auto-add signals to a display Behaviour-change: Synchronized DAQ-List start will automatically be activated (if available) FixedBug: When using "Change into" in conjunction with Ethernet video cameras or loggers, it is possible that individual internal parameters will not be accepted correctly. FixedBug: The validation of complex scripts with a larger number of if/else if combinations can trigger a crash of IPEmotion. Known restrictions: By Undo/Redo deleted or undeleted signals does not work with formulas correctly. V15.10.00 Known restrictions: - When using "Change into" in conjunction with Ethernet video cameras or loggers, it is possible that individual internal parameters will not be accepted correctly. - The validation of complex scripts with a larger number of if/else if combinations can trigger a crash of IPEmotion. Initial release