| Channel volt |
| Measurement range SENS |
±0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 / 20 / 50 / 100 V |
| Accuracy at ambient temperature 25 °C |
0.06 % from the selected measuring range |
| Drift for ambient temperature -40 … 105 °C |
20 ppm/K |
| Input HV |
| * Safety instructions |
|
| Measurement input IEPE |
| Leerlaufspannung |
24 V |
| Channel current |
| Measurement range |
0 … 20 mA, ±20 mA |
| Accuracy |
±0.30 % |
| Internal shunt resistor |
50 Ω |
| General channel properties |
| AD converter |
16 bit / SAR (successive approximation register) |
| Special functions |
Sensor breakage detection (activation via software setting), Offset adjust, during measurement, multiple groups |
| Oversampling |
100 kHz |
| Channel sampling rates |
1 / 2 / 5 / 10 / 20 / 50 / 100 kHz (CAN up to 2 kHz), 1 / 2 / 5 / 10 / 20 / 50 / 100 / 200 / 500 Hz |
| Aggregate sample rate |
400 kHz |
| Hardware filter (switchable) |
Butterworth (8-pole), Accuracy 5 %, 12 kHz (optional 20 kHz) Cut-off frequency |
| Hardware filter (fixed) |
Accuracy 25 %, 49 kHz Cut-off frequency, Typ RC 4-Pol |
| Software filter types |
Butterworth, Elliptic (8-pole), Bessel |
| Channel impedance |
5 MΩ |
| Software filter (DSP selectable) |
Accuracy 0.05 %, 1.0 / 1.25 / 1.67 / 2.5 / 5.0 / 6.67 / 10 / 12.5 / 16.67 / 25 / 50 / 33.34 kHz, 10 / 12.5 / 16.67 / 25 / 50 / 100 / 125 / 166.67 / 250 / 500 / 666.67 Hz |
| Channel LED |
Yes, In case of overcurrent of sensor supply, Channel LED is flashing during configuration, Yes |
| TEDS |
Class 2 |
| Channel CNT |
| Number of inputs |
|
| ENOB (Effective Number Of Bits) |
| ENOB 3.6Vpp Sinus, Messbereich 4Vpp, bei 125 Hz |
Typ. 19.1 bit, with hardware and software filter (250 Hz, Butterworth), Typ. 15.7 bit, without filter (full bandwidth) |
| ENOB 3.6Vpp Sinus, Messbereich 4Vpp, bei 1 kHz |
Type. 16.8 bit, with hardware and software filter (1250 Hz, Butterworth), Typ. 14.3 bit, without filter (entire bandwidth) |
| THD (Total Harmonic Distortion) |
| THD 3.6Vpp Sinus, Messbereich 4Vpp, bei 125 Hz |
Typ. 95 dB, without filter (entire bandwidth) |
| THD 3.6Vpp Sinus, Messbereich 4Vpp, bei 1 kHz |
Typ. 87 dB, without filter (entire bandwidth) |
| Excitation |
| Sensor excitation ranges |
Bipolar ±2.5 / ±5 / ±7.5 / ±8 / ±10 / ±12.5 / ±15 V |
| Sensorspeisung |
|
| Accuracy excitation at ambient temperature 25 °C |
±0.50 % |
| Accuracy excitation at ambient temperature 85 °C |
±0.70 % |
| Sensor excitation current |
60 mA (for V output ±7.5 / ±15.0 V), 40 mA (for V output ±5.0 / ±12.5 V), 30 mA (for V output ±2.5 / ±10.0 V |
| Galvanic isolation |
| Input ↔ module power supply |
±100 V (indefinitely), ±500 V (pulse voltage) |
| Input ↔ CAN |
±100 V (indefinitely), ±500 V (pulse voltage) |
| Input ↔ enclosure |
±100 V (indefinitely), ±500 V (pulse voltage) |
| Input ↔ input |
±100 V (indefinitely), ±500 V (pulse voltage) |
| Input ↔ excitation |
±100 V (indefinitely), ±500 V (pulse voltage) |
| Device |
| Inputs |
4 |
| Genauigkeiten |
|
| Maximum input protection voltage (channel) |
±100 V (continuous), ±200 V (short-time, t < 1 ms) |
| Voltage supply |
9 … 36 VDC |
| Supply voltage thresholds |
On 9 ±0.3 VDC / Off 6 ±0.3 VDC |
| Power consumption, typical |
4.2 W (all excitations off) |
| Working temperature range |
-40 … 105 °C (-40 … 221 °F) |
| Storage temperature range |
-55 … 105 °C (-67 … 221 °F) |
| IP-Code |
IP 67 (ISO 20653 - 2013) |
| Relative humidity |
5 ... 95 % |
| Dimensions |
W106 mm x H60 mm x D62 mm (4.17 in x 2.36 in x 2.44 in) |
| Weight |
500 g (1.10 lb) |
| Configuration interface |
Ethernet |
| Data transfer rate |
100 Mbit Ethernet (IEEE 802.3) |
| Input sockets |
Lemo EGG 1B 307 (7-Pin) |
| Status LED |
Yes |
| Schutz gegen aggressive Flüssigkeiten |
|
| Electrical data |
| Status LED |
|
| Accessories |
| Module |
X-FEED |
| System cable |
630-500, X-Link-TERM, 630-302, 630-504, USB2ETH-XLINK, X-Link-DEF, 630-505, 630-501, 630-507, 630-524 |
| Input cable |
600-866, 670-811, SENS8-TEDS, 620-695, 600-731, 670-807, 670-810 |
