ETH-Gateway CLFD

ETH-Gateway with CAN, LIN, FlexRay interfaces for IPEmotion

Technical Data

CAN Interface
CAN HS (ISO 11898-2)	16
Input sockets	15 x CAN on SUB-D (44-pol), 1 x CAN on SUB-D (9-pol)
Galvanically isolated	No
Status-LED	16 Rx/Tx for CAN interfaces / 1 x ETH link
Power consumption, WoC+NML
Power consumption, WoC
LIN interface
LIN (1.3 & 2.0)	8
Input sockets	8 x LIN on SUB-D (15-pol)
Status LED	8 Rx/Tx for LIN interfaces / 1 x ETH link
Power consumption, WoL+NML
Power consumption, WoL	0.1 W
DIO interface
Status LED
Switching capacity digital-output
Analog interface
Galvanic isolated	No
FlexRay interface
FlexRay	2
Input sockets	2 x FlexRay on 2 x SUB-D (9-pole)
Galvanic isolated	Yes
Power consumption, WoFR+NML
Power consumption, WoFR	0.6 W
Status LED	4 Rx/Tx for FlexRay interfaces / 1 x ETH link
Device
Voltage supply	6 … 50 VDC, 8 … 27 VDC (for LIN measurement)
Supply voltage thresholds	Switch-on 6 ±0.3 VDC / Switch-off 6 ±0.3 VDC
Power consumption, typical	9.0 W
Power consumption, standby	0.1 W
Working temperature range	-40 … 85 °C (-40 … 185 °F)
Storage temperature range	-45 … 90 °C (-49 … 194 °F)
IP-Code	IP 40 (ISO 20653 - 2013)
Relative humidity	5 ... 95 %
Dimensions	W184 mm x H78 mm x D140 mm (7.24 in x 3.07 in x 5.51 in)
Weight	2300 g (5.07 lb)
Configuration interface	Ethernet
Data transfer rate	100 Mbit Ethernet (IEEE 802.3)
Configuration software	IPEmotion
Test standards	AK-LV 01
Status LED
Input sockets	15 x CAN on SUB-D (44-pol), 1 x CAN on SUB-D (9-pol)
Accessories
System cable	620-574 LOG-PR05 cable banana
Input cable	620-699 CLFD-Box V1.2 CAN1-15 cable 15xSubD9/P

Show all data

Do you have questions about this product or a special application? Get in touch with our experts!